• ATS1-100/3P A

  • ATS1 series dual power automatic transfer switch is belong to CB grade automatic transfer switch if you choose the breaker with over-current trip as actuator. It is with selective protection function, and provide short-circuit and overload protection to the load and cables at bottom.Its ability of closing and breaking circuit is far more larger than use of contactors and relays , and other components.
    Usage category：AC-33B
    Anti-heat&humidity measure have passed the test under stringent environmental conditions, the standards are as follows:
    IEC 60068-2-1 Dry and cold environment（-25℃）
    IEC 60068-2-1 Dry and hot environment（+70℃）
    IEC 60068-2-1 Low terperature
    45℃时， Use under 95%Relative humidity of the environment
    55℃时， Use under 80%Relative humidity of the environment
    EMC Electromagnetic compatibility
    ATS1 Automatic transfer switch can resist
    electrostatic discharge（IEC 61000-4-2)Level 2
    Radio frequency electromagnetic radiation immunity（IEC 61000-4-2)Level 3
    Electrical transient burst fast（IEC 61000-4-2)Level 3
    Surge（IEC 61000-4-2)Level 4
    Radio frequency electromagnetic conduction immunity（IEC 61000-4-2)Level 3
    Radiation level（CISPR11) B Class

    Standards： IEC60947-1，IEC60947-2,IEC60947-6-1，GB14048.1General rules，GB14048.2 Breaker
    GB14048.11Automatic transfer switch

  • Frame Current Level: 100A, 160A, 250A

    Pole：2/3/4P

    Controller Type：B Board type，B Device type

    Electric level: CB with short circuit and overload protection

    Working mode：R self-input and self back to normal， S self-input not back to normal I Mutual reserve

  • Share on facebook Share on twitter Share on email More Sharing Services
    Copyright © 2005-2015 Zhejiang Zoroad Electric Co. Ltd. All Rights Reserved.